You have 0 items in your cart.
Total Cost: $0.00

Oliver Corporation

 

Rubberhog Grinding Wheels are your best custom-made solution for grinding rubber and other elastomer materials.

Rubberhog Wheel Design Center


Inches Millimeters (mm)

Use the tabs to pick what product you want a quote for.

Dimensions

You have selected inches as your unit of measure.

Please enter all dimensions in decimal format. Fractions will not be processed properly.

Coating Type

SSG Size MCM Size Description Application
SSG 550 MCM 120V Extremely Coarse Rough Grinding or Finish Grinding Very Hard Materials (>80 Shore "A")
SSG 460 MCM 90V Very Coarse Rough Grinding or Finish Grinding Hard Materials(>70 Shore "A")
SSG 390 MCM 70 Coarse Finish Grinding Hard Materials (>60 Shore "A")
SSG 330 MCM 60 Medium-Coarse Finish Grinding Medium to Hard Materials (>50 Shore "A")
SSG 230 MCM 50 Medium-Fine Finish Grinding Medium Materials (Best General-Purpose Size 40-80 Shore "A")
SSG 200 MCM 40 Fine Finish Grinding Soft Materials (<50 Shore A)
SSG 170 MCM 30 Very Fine Finish Grinding Some Soft Materials (<40 Shore "A"
SSG 110   Extremely Fine Special-Purpose Size

Note: these are only general recommendations due to the wide variation in grinding material and equipment conditions. You should contact your Rubberhog representative about your situation.

Dimensions

You have selected inches as your unit of measure.

Please enter all dimensions in decimal format. Fractions will not be processed properly.

Coating Type

SSG Size MCM Size Description Application
SSG 550 / 330 MCM 90V / 70 Dual Step Combined Rough/Finish Cuts on Hard Materials (>60 Shore "A")
SSG 460 / 230 MCM 90V / 50 Dual Step Combined Rough/Finish Cuts on Most Materials (Best General-Purpose Size 40-80 Shore "A")
SSG 460 / 200 MCM 70 / 40 Dual Step Combined Rough/Finish Cuts on Soft Materials (<50 Shore "A")
SSG 390 / 170 MCM 70 / 30 Dual Step Combined Rough/Finish Cuts on Some Soft Materials (<40 Shore "A")

Note: these are only general recommendations due to the wide variation in grinding material and equipment conditions. You should contact your Rubberhog representative about your situation.

Dimensions

You have selected inches as your unit of measure.

Please enter all dimensions in decimal format. Fractions will not be processed properly.

Coating Type

SSG Size MCM Size Description Application
SSG 550 / 330 / 550 MCM 90V / 70 / 90V Triple Step Combined Rough/Finish Cuts on Hard Materials (>60 Shore "A")
SSG 460 / 230 / 460 MCM 90V / 50 / 90V Triple Step Combined Rough/Finish Cuts on Most Materials (Best General-Purpose Size 40-80 Shore "A")
SSG 460 /200 / 460 MCM 70 / 40 / 70 Triple Step Combined Rough/Finish Cuts on Soft Materials (<50 Shore "A")
SSG 390 / 170 / 390 MCM 70 / 30 / 70 Triple Step Combined Rough/Finish Cuts on Some Soft Materials (<40 Shore "A")

Note: these are only general recommendations due to the wide variation in grinding material and equipment conditions. You should contact your Rubberhog representative about your situation.

Dimensions

You have selected inches as your unit of measure.

Please enter all dimensions in decimal format. Fractions will not be processed properly.

Coating Type

SSG Size MCM Size Description Application
SSG 550 MCM 120V Extremely Coarse Rough Grinding or Finish Grinding Very Hard Materials (>80 Shore "A")
SSG 460 MCM 90V Very Coarse Rough Grinding or Finish Grinding Hard Materials (>70 Shore "A")
SSG 390 MCM 70 Coarse Finish Grinding Hard Materials (>60 Shore "A")
SSG 330 MCM 60 Medium-Coarse Finish Grinding Medium to Hard Materials (>50 Shore "A")
SSG 230 MCM 50 Medium-Fine Finish Grinding Medium Materials (Best General-Purpose Size 40-80 Shore "A")
SSG 200 MCM 40 Fine Finish Grinding Soft Materials (<50 Shore "A")
SSG 170 MCM 30 Very Fine Finish Grinding Some Soft Materials (<40 Shore "A")
SSG 110   Extremely Fine Special-Purpose Size

Note: these are only general recommendations due to the wide variation in grinding material and equipment conditions. You should contact your Rubberhog representative about your situation.











Privacy Notice: We hate spam and telemarketers as much as anyone. Your personal information will never be sold or shared.

7445 Mayer Rd. Cottrellville, MI, USA 48039 | Telephone: (810) 765-1000 Fax: (810) 765-7000

Copyright © 2010 Oliver Carbide Products | All Rights Reserved | Privacy Policy | Shipping & Return Policy

Design by Infinite Web Design