Step 1 of 4
Groove Style
—Please choose an option—Full RadiusSquare CornerV-groove
Unit of Measure inmm
A. (Coated O.D.)
B. (Groove Width)
C. (I.D.)
D. (Width @ I.D.)
E. (Hub O.D.) (Optional)
W. (Web Width)
CR. (Corner Radius)
GD. (Groove Depth)
Quantity of Wheels
A. (O.D.)
GA. (Groove Angle)
MR. (Maximum Radius)
Back
Step 2 of 4
First, Select your Coarseness
Coarseness & Application
Extremely Coarse - Large grooves in hard materials (>85 Shore 'A')Very Coarse - Large grooves in hard materials (>80 Shore 'A')Coarse - Average-size grooves in medium-hard and hard materials (>60 Shore 'A')Medium-Coarse - Average-size grooves in medium-hard materials (>50 Shore 'A')Medium-Fine - Average-size grooves in medium materials (>40-60 Shore 'A')Fine - Narrow grooves in medium and soft materials (< 65 Shore 'A')Very Fine - Very narrow grooves in medium and soft materials (< 65 Shore 'A')
Next, Select Your Coating Type (Learn About Our Coatings)
SSG or MCM Coating
SSG 550MCM 120VGRIT 12/14
SSG 460MCM 90VGRIT 16
SSG 390MCM 70GRIT 23
SSG 330MCM 60GRIT 46
SSG 230MCM 50GRIT 60
SSG 200MCM 40GRIT 80
SSG 170MCM 35GRIT 100
*Some Selections may only have one type of coating available
Step 3 of 4
Share any additional information you wish to share regarding your products needs here.
Upload a photo or drawing (if necessary)
Step 4 of 4
First Name
Last Name
Company
Address 1
Address 2
City
State / Province /Territory
Zip
Country
Email
Phone
Submit Message